| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
MAINTENANCE OF HYDRAULIC STARTING SYSTEM
5-48
REPLACE STARTING MOTOR.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
Equipment Conditions:
Tool Kit, Mechanic's, Rail
Engine shut down
and Marine
Hydraulic starting system
drained of oil at starting
motor Accumulator valves
closed
General Safety Instruction:
Ensure that hydraulic pressure
in the system is relieved before
working on system.
REMOVAL
REMOVE STARTING MOTOR.
a. Close both accumulator valves.
WARNING
To prevent possible injury, the oil pressure in the system must be released prior to
servicing the starting motor or any other components of the system.
b. Release pressure in hydraulic system.
c
Clean all exterior dirt from the starting motor
and hydraulic lines using detergent and water
solution.
d. Disconnect the male connector (1) from the
starting motor (2). Cover the open ends with
caps to prevent entry of any foreign matter.
e. Remove the three retaining bolts (3) and
lockwashers (4) and lift the starting motor
away from the flywheel housing.
5-124
|
||
|
||
