REPAIR RAMP WINCH

Custom Search

INSPECTION-cont.

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

DISASSEMBLY

TM 55-1905-222-14

6-10

REPAIR RAMP WINCH.

This task covers

a. Disassembly

c. Inspection

b. Cleaning

d. Assembly

INITIAL SETUP

Tools:

Materials/Parts:

Tool Kit, Mechanic's, Rail

'O' Ring

and Marine

P/N 50352

5180-00-629-9783

'O' Ring

Bearing puller

P/N 50333

C13115

'O' Ring

Bushing Installer

P/N 50346 (2)

B1397 (Gearmatic)

'O' Ring

Heel Bars

P/N 50343

Pinch Bars

'O' Ring

P/N 50306 (2)

Materials/Parts:

'O' Ring

P/N 50488

Cleaning Solvent

'O' Ring

Item 17, Appendix E

P/N 50332

Grease (MIL-G-18709)

'O' Ring

Item 22, Appendix E

P/N 50339

Oil Seal

'O' Ring

P/N 50482

P/N 50337

Oil Seal

P/N 50483

Equipment Conditions:

'O' Ring

P/N 50328(2)

Reference

Para 5-22 Winch motor removed

DISASSEMBLY

1. REMOVE FINAL DRIVE ASSEMBLY.

Remove seven nuts (1) and lockwashers (2)

from the final drive end of the winch.

Use two heel bars and remove the final drive

housing (3) from the dowel bolts (4).

6-39