DISASSEMBLY-cont. - TM-55-1905-222-140421

Custom Search

DISASSEMBLY

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

DISASSEMBLY-cont.

TM 55-1905-222-14

6-10

REPAIR RAMP WINCH (Continued).

3 DISASSEMBLE PRIMARY DRIVE ASSEMBLY

CAUTION

Do not remove this assembly as a unit as damage may be caused to the seal diameter of the

primary planet hub and the tapered seal diameter of the taper seal ring on the sun gear shaft.

a. Remove spring cover and motor assembly

(14) (refer to para 5-24).

b. Remove primary sun gear (15) from the bore

of the primary planet assembly (16) if not

already removed with the motor assembly.

c. Remove retainer (17) from inside of the

segments (18), then remove segments (18) from the

primary housing (19).

d. Remove primary planet assembly (16).

e. Remove ring gear (20) backing plate (21), brake

plates (22) and divider plate (23).

Remove 'O' ring (24), oil seal (25), seal ring

(26) and snap ring (27).

g. Remove pipe plugs (28 and 29) from primary

housing (19). Remove primary housing.

6-41