TM 55-1905-222-14
6-17 REPAIR RECHARGING PUMP (Continued).
ADJUSTMENT
ADJUST PUMP.
NOTE
Pump should be installed in its hydraulic circuit or test stand for adjustment to be
made.
a. Start engine served
by
pump
requiring adjustment.
b. Remove unloading valve cap (15) to
gain access to adjusting screw (16).
c. Use a screwdriver to turn adjusting
screw (16) clockwise to increase
setting or counterclockwise
to
decrease setting Set the adjusting
screw for the pump to unload at 3000
psi.
6-94