ASSEMBLY-cont. - TM-55-1905-222-140473

Custom Search

ASSEMBLY-cont.

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

ADJUSTMENT

TM 55-1905-222-14

6-17 REPAIR RECHARGING PUMP (Continued).

I. Install valve seat (36), check ball (35)

and spring (34). Install hex plug (32)

with a new 'O' ring (33)

m. Install Woodruff key (18) In the drive

shaft (9) and check once more for

free rotation of the shaft

2. ASSEMBLE DRIVE ASSEMBLY

a. Lubricate new oil seal (52) and

install into flange assembly (51)

b. Install intermediate drive (50) in

flange assembly (51)

3. ASSEMBLE DRIVE ASSEMBLY AND

PUMP ASSEMBLY

a. Install pump assembly drive shaft (9)

with key (8) in place into drive

assembly (4)

b. Secure both assemblies with four

screws (5), lockwashers (6) and nuts

(7)

c. Check distance 'A' -

should

measure 2 594 inches (65 888 mm)

before tightening screws (5)

d. Install setscrew (3) and pipe plug (2)

in drive assembly (4)

6-93