| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-222-14
6-18 REPAIR ACCUMULATOR (Continued).
f. Remove screws (8), lockwashers (9),
and retaining plate (10) from end cap.
g. Screw a 1/2 - 20 fitting into air valve
assembly (3) port.
h. Push end cap (11) away from ring
segments (12 and 13).
I. Remove ring segments (12 and 13),
and remove end cap (11) Discard
gaskets.
j. Remove back-up seal rings (14).
k. Repeat steps a thru e. and remove oil
end cap (15) using proper fitting for oil
port size.
I. Using a wooden dowel, push piston
(16) out of housing (7).
m. Remove seal rings (17) from piston
(16) Discard gaskets.
n. Remove nameplate (18), strap (19)
and locking clip (20) Remove only if
damaged or defaced.
CLEANING
CLEAN ACCUMULATOR PARTS.
WARNING
Dry cleaning solvent, P-D-680, used to clean parts, is potentially
dangerous to personnel and property. Avoid repeated or prolonged skin
contact. Do not use near open flame or excessive heat. Flash point of
solvent is 100 138 ( 38 59 ).
-
F
-
C
Clean metal parts in cleaning solvent P-D-680 and dry
thoroughly.
6-96
|
||
|
||
