DISASSEMBLY-cont. - TM-55-1905-222-140477

Custom Search

DISASSEMBLY

TM-55-1905-222-14 Landing Craft Mechanized (LCM-8) (ROHR and Gunderson Models) (1905-01-284-2647 AND 1905-01-284-2648) Manual

DISASSEMBLY-cont.

TM 55-1905-222-14

6-18 REPAIR ACCUMULATOR (Continued).

INSPECTION

INSPECT ACCUMULATOR PARTS

a. Use a drop-light to examine the

bore of the cylinder. The bore must

be smooth and free of scratches.

Check segment ring grooves.

b. Examine caps for damage Check

fitting threads, valve threads, and

fuse holder thread if holder has

been removed

c. Examine piston for scratches or

scoring on 0 D. The piston must be

checked in cylinder to be sure it

moves freely throughout the entire

length of cylinder

d. Examine air valve threads and

replace if damaged Check for

damaged valve seat.

e. Inspect seal rings for damage

f. Replace any accumulator damaged

beyond repair.

g. Replace all gaskets.

h. Replace other defective parts as

found in inspection.

ASSEMBLY

ASSEMBLE ACCUMULATOR

a. If removed, install nameplate (18),

strap (19), and locking clip (20) onto

housing (7).

b. Install seal rings (17) onto piston (16)

Lubricate seal with OE-10.

c. Coat inside diameter of housing (7)

with light oil.

6-97