| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
Table 2-1. Description of Operator's Controls and Indicators - CONT
Key
Control or Indicator
Function
Engine Room Console Panel (FIGURE 2-26) - Continued
3
CLEAN LUBE OIL
Indicates No. 1 or No. 2 pump is transferring
PUMPS
clean lubricating oil to engine sumps (white).
4
DIRTY LO PUMP
Indicates pump is transferring dirty lubricating
oil off the vessel to a shore facility.
5
LUBE OIL
Indicates the LUBE OIL PURIFIER UNIT is
PURIFIER
operating (white).
UNIT
6
LUBE OIL
Indicates LUBE OIL PURIFIER HEATER is operating
PURIFIER
(white).
HEATER
7
ACKNOWLEDGE
Pushbutton will turn OFF the alarm relay (red).
8
Display CRT which displays alarm message.
9
SCAN
Pushbutton will cause alarm messages to be
displayed in reverse order of occurrence (white).
10
OIL/WATER
Indicates OIL/WATER SEPARATOR is operating
SEPARATOR
(white).
11
F.O. TRANSFER
Indicates No. 1 or No. 2 F.O. TRANSFER PUMP is
PUMPS
operating (white).
12
POWER ON
Illuminated, indicates NGINE ROOM CONSOLE PANEL
E
LAMP TEST
is powered. Depressed, provides test of all
panel lamps (white).
13
START
Pushbutton starts BILGE PUMP. Illuminated,
RUN
indicates BILGE PUMP is operating (green).
14
STOP
Pushbutton stops BILGE PUMP (red).
15
START
Pushbutton starts No. 1 RESH WATER MAKER.
F
RUN
Illuminated, indicates No. 1 RESH WATER MAKER
F
is operating (green).
16
STOP
Pushbutton stops No. 1 FRESH WATER MAKER
(red).
17
START
Pushbutton starts No2 FRESH WATER MAKER
.
.
RUN
Illuminated, indicates No. 2 FRESH WATER MAKER
is operating (green).
|
||
|
||
