| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
Table 2-2. Operator/Crew Preventive Maintenance Checks and Service - CONT
B - Before
D - During
A - After
W - Weekly
M - Monthly
INTERVAL
PROCEDURES
EQUIPMENT IS
ITEM
ITEM TO BE
CHECK FOR AND HAVE REPAIRED
NOT READY/
NO
B
DA W M
INSPECTED
OR ADJUST AS NECESSARY
AVAILABLE IF:
l
l
l
1
General Craft
Inspect glass, frames and brackets for
Cleanliness
damage; clean windows, vents and ports.
Inspect entire craft for cleanlinss.
e
2
l Life Lines and
Ensure life lines are in good condition, and
l
Stanchions
are secured in place. Visually inspect safety
chains for wear and corrosion. Ensure
safety chains are utilized.
l Life Jackets
3
Life jackets shall be inspected for rips, oil
Life jackets
l
stains, broken straps, fiber deterioration,
are unservice-
and hull marking of vessel.
able.
Check that light attached to jacket operates
and that case is not damaged.
4
l Life Rings
Inspect for damage and proper marking.
l
Check that marker lights function when
casing is turned upright.
5
l Fire Pull Box
Inspect box and pull handles for damage.
Damage or
Document all defects and discrepancies
condition
and refer to unit maintenance.
exists which
makes Fire Pull
Box inoperable.
6
Fire Station and
Foam Station
WARNING
During inspections, immediately report any
defects to your superisor and correct without
v
delay or refer to unit maintenance.
Inspect fire hose in the hose rack for tears,
l
l
fraying or cuts. Check nozzle and nozzle
handle for proper operation.
|
||
|
||
