| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
(d) Direct crew members on forecastle decks to turn RATCHET HANDLE (3, FIGURE 2-180) and secure
LOCKING CLAMP (2) on the ramp stud. Install LOCKOUT PINS (5).
(e) On Pilothouse Bow Ramp Control Panel (FIGURE 2-178), press STOP pushbutton (4).
(f) On Pilothouse Bow Ramp Control Panel (FIGURE 2-178), set POWER ON-OFF switch (1) to OFF
position.
(g) In Boatswain Storeroom on Bow Ramp Motor Controller, press STOP pushbutton and observe
MOTOR STOP indicator out.
(h) On Main Switchboard (FIGURE 2-174), set BOW RAMP WINCH circuit breaker (2) to OFF position.
2-22. Stern Anchor Winch Operation.
WARNING
Before operating stern anchor winch, ensure personnel and foreign objects are
clear of wire rope drum, wire rope, and related components. Moving winch, wire
rope and gypsies can cause serious injury or death.
Keep all personnel clear of winch and wire rope while in operation.
Keep all personnel clear of moving and rotating parts of winch.
Do not attempt to perform any maintenance or repairs while winch is running
Do not operate this winch with guards removed.
Do not operate hydraulic motor with brake engaged.
a. Startup Procedure.
(1) On Main Switchboard (FIGURE 2-181), set STERN ANCHOR WINCH circuit breaker (1) to ON
position.
(2) On STERN ANCHOR WINCH MOTOR CONTROLLER (FIGURE 2-182) (located in passageway) set
ON-OFF switch (1) to ON position.
(3) On STERN CONTROL BOX (FIGURE 2-183), press START pushbutton (1).
(4) Check MOTOR RUNNING indicator light (2) is lit.
2-510
|
||
|
||
