| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
NOTE
If the windows are foggy or are icing up, on CLEARVIEW SCREEN switchbox, set
PORT HTR, CTR HTR, and STBD HTR ON/OFF switches (2, 3, and 4) to ON
positions.
b. Turn Off Rotary Window Wipers To turn off rotary window wipers, perform the following:
.
(1)
On CLEARVIEW SCREEN switchbox, select window wiper to be turned off: Port, Center or
Starboard.
(a) If Port is to be turned off, set PORT SPIN ON/OFF switch (1) to OFF position.
(b) If Center is to be turned off, set CTR SPIN ON/OFF switch (6) to OFF position.
(c) If starboard is to be turned off, set STBD SPIN ON/OFF switch (5) to OFF position.
(2) On the CLEARVIEW SCREEN switchbox, set the PORT HTR, CTR HTR, and STBD HTR ON/OFF
switches (2, 3, and 4) to OFF positions.
(3) In Pilothouse on EL-102 panel, set CLEARVIEW SCREEN HTR circuit breaker 14 to OFF position.
2-29. Watertight Hatch Operation All hatches that open onto a weather deck are watertight. To secure
.
watertight condition secure all dogs on each hatch.
.
WARNING
High pressures exist inside lamp, especially when hot, and under certain conditions
it could explode. Handle lamp only in its protective cover.
Remove protective cover from lamp before energizing circuits. Protect the eyes
and wear gloves when removing cover from lamp. An industrial type face mask is
recommended for eye and face protection.
Avoid direct exposure from powerful direct and reflected radiations given off by
lamp. The front cover glass provides protection from these radiations.
Do not stand close in front of searchlight front cover glass when lamp is lighted. In
the event of lamp explosion the front cover glass could break causing serious
personal injury.
|
||
|
||
