| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-10
______________________________________________________________________________________
______________________________________________________________________________________
g.
Battery Charger:
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
______________________________________________________________________________________
h.
Port Main Generator:
Condition: Test operate, observe that unit accepts, shares, and transfers load, unit responds to speed and load
sharing controls, substantially constant frequency is maintained during load changes, overspeed trip is
operational. Inspect fuel oil, lube oil, engine cooling water and exhaust systems (check lagging) for leaks.
Pressures and temperatures are in normal range. Observe for excessive vibration. Review log for unusual or
abnormal operating conditions or incidents. Review oil analysis reports and oil consumption records for
abnormal conditions and excessive oil consumption. Check log for accomplishment of following P/M services
as applicable:
Annual
Adjust valves and injectors
Check/replace hoses
Check/tighten turbo charge mounting bolts
Check/tighten engine mounting bolts
Check crankshaft and clearance
Check safety controls
Remove and clean magnetic pick up
Bi-annual
Replace injectors as necessary
Replace fuel pump as necessary
Check turbocharger clearances
Check vibration dampner
Replace water pump and idler pulley
NOTE: Draining and flushing of the generator engine cooling system is required at 36 month intervals.
This is normally included in the OCCM repair specification.
Change 8 G-75
|
||
|
||
