| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
(b)
Fill crankcase until oil on dipstick (2, FIG. 2-1) or in liquid level
gauge (FIG. 2-2) reaches the "H" (High) mark.
(c)
Remove plug (1, FIG. 2-1) from lubricating oil filter head and use
this opening as the priming point.
(d)
Connect a hand or motor-driven priming pump hose from source of clean
lubricating'oil to priming point.
(e)
Prime until a 30 psi (207 kPa) pressure is obtained.
FIGURE 2-1. Lube Oil Priming Point and Oil
FIGURE 2-2. Oil Level Sight Glass.
Fill/Dipstick Arrangement.
2-3
|
||
|
||
