| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
REPLACEMENT
a. Install lube oil filter assembly.
WARNING
The lube oil filter assembly is very heavy. To avoid personal
injury, two soldiers are required to lift the lube oil filter assembly.
CAUTION
The lube oil filter assembly must be installed opposite the
engine bank to where the oil transfer tube is connected. If the
oil filter assembly is installed on the wrong bank, the engine will
be damaged severely because of the lack of lubrication.
NOTE
The lube oil filter assembly contains the pressure regulator,
piston cooling and filter bypass valves. Make sure these valves
are installed by intermediate direct support maintenance prior to
mounting the new lube oil filter assembly to the block.
(1) Install guide studs in the upper corners of the filter head mounting flanges.
CAUTION
The lube oil filter head gasket (3) has a rib down the center.
This gasket must be installed on the right end of the lube oil
filter assembly. If installed incorrectly, the engine will be
damaged due to loss of lubrication.
(2) Install filter head gasket (1) and lube oil filter head gasket(3) over the guide studs.
(3) Position the lube oil filter assembly (5) over the guides.
(4) Install ten lockwashers (8) and machine bolts (4) finger tight.
2-84
|
||
|
||
