| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
e. Replace access cover (45).
(1) Position gasket (46) on access cover (45) with bolt holes aligned.
(2) Position access cover (45) on access cover (11) with bolt holes aligned.
(3) Install four flat washers (42), lockwashers (43), and hexagon head capscrews (44). Tighten to 40 ft-
lb (54 N ).
m
f. Replace access covers (3 and 5).
(1) Position gasket (6) on access cover (11).
(2) Position access cover (5) on access cover (11) with bolt holes aligned.
(3) Position gasket (4) on access cover (11) with bolt holes aligned.
(4) Position access cover (3) on access cover (11) with bolt holes aligned.
(5) Install lockwashers (2 and 7) and hexagon head capscrews (1 and 8) in each access cover (3 and
5). Tighten hexagon head capscrews to 45 ft-lb (60 N m).
g. Replace engine mount bracket (39).
(1) Install gasket (23) in engine mounting bracket (39). Lubricate mount bore and trunnion sleeve with
grease.
(2) Install engine mount bracket (39) on access cover (11).
(3) Install two lockwashers (25) and hexagon head capscrews (24). Tighten to 270 ft-lb (365 N
m).
h. Replace crankshaft adapter (41) (para. 4-12).
i. Replace engine vibration damper (40) (para. 4-12).
j. Replace damper guard (38).
(1) Position damper guard (38) against access cover (11) with bolt holes aligned.
(2) Install eight lockwashers (33) and hexagon head capscrews (34) and tighten.
k. Replace damper guard (29).
(1) Position dumper guard (29) against damper guard (38) with mounting tabs behind front gear
housing (15).'
(2) Install two flat washers (32), lockwashers (31), and hexagonhead capscrews (30).
3-56
|
||
|
||
