| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
(1) Position gasket (16) on front gear housing (15) with bolt holes aligned.
(2) Position front gear housing (15) on engine with bolt holes aligned.
(3) Install fifteen lockwashers (14) and hexagon head capscrews (13).
(4) Tighten capscrews (13) to 45 ft-lb (60 N m) using the sequence shown in FIG. 3-14.
c. Install camshaft and gear group (para. 3-24).
d. Replace access cover (11, FIG. 3-13).
WARNING
The cover access is heavy. To avoid personal injury or
equipment damage, use a hoist or get assistance when lifting
the access cover.
(1) Position gasket (12) on access cover (11) with bolt holes aligned.
FIGURE 3-14. Front Gear Cover Torquing Sequence.
(2) Position access cover (11) on front gear housing (15) with bolt holes aligned. Use a mallet to tap
the cover over the dowel pins until the cover is touching the housing (15).
(3) Install 24 lockwashers (10) and hexagon head capscrews (9). Tighten to 40 ft-lb (54 Nm).
3-55
|
||
|
||
