| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-1
FIGURE 4-80. Camshaft Bushing Removal.
WARNING
Use protective measures to prevent personal injury.
c.
Remove block from engine stand and place in cleaning tank.
CAUTION
Use a cleaning solution that will not damage the camshaft bushing.
NOTE
Follow instructions of the manufacturers of the cleaning tank and cleaning solution.
Use a cleaning solution that can be heated to 180 to 210 (80 to 95 ). Use
F
F
C
C
a cleaning tank that will mix and filter the solution.
d.
Clean block. Remove block from cleaning tank.
CAUTION
Ensure all water is removed from bolt holes and oil passages.
e.
Steam clean block. Verify all oil passages are clean. Dry with compressed air.
f.
If block is not going to be used immediately, apply a coating of preservation oil to prevent rust. Cover
block to prevent dirt from accumulating.
4-90
|
||
|
||
