| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-10
Table 2-1.
Preventive Maintenance Checks and Services - CONT
D - Daily
M - Monthly
Q - Quarterly
S - Semiannually
A - Annually
B - Biennially
Item
Interval
Items To Be
Procedures
No.
Inspected/Servic
D M QS A B
13
Suction Strainer Element -
(17)
Check pressure gauge (PMCS, Item 1)
CONT
CONT
(18)
Check temperatire level sensor (PMCS, Item 2).
14
Hydraulic Fluid
Change the hydraulic fluid by following the
procedure in PMCS, Item 6.
NOTE
Clean suction strainer elements each time
hydraulic fluid is changed.
Winch Assembly
15
Oil level
Check oil level in gear case of winch assembly
as follows:
(1)
Turn off electric motor to power pack assembly.
(2)
Wait 5 minutes for oil to settle in lower portion of
gear case.
(3)
Locate sight glass on side of gear case housing.
(4)
Verify that oil is visible in sight glass.
(5)
If oil is not visible in sight glass, remove oil fill plug
from top of gear case housing.
2-14
|
||
|
||
