ASSEMBLY - TM-55-1905-223-24-100146

Custom Search

DISASSEMBLY

TM-55-1905-223-24-10 Bow Ramp Assembly for Landing Craft Utility (LCU) NSN 1905-01-154- 1191 Manual

Repair Bow Ramp Lifting Assembly.

TM 55-1905-223-24-10

c. Dry all components with compressed air.

ASSEMBLY

a. Prior to reassembly of winch assembly coat all packing with lubricating oil and seals with lubricating grease.

Coat threads of all screws with locktite (see lubrication chart LO 55-1905-223-12).

b. Install cable anchors (3) into winch drum (4). Install inboard end of winch assembly including gear reducer, see

c. At outboard of winch assembly install upright (17) with identification plate seal slee ves (5), seal (6), bearing (15),

shaft retainer (10), hex head capscrews (11) and secure in rotation until snug.

d. On capscrews (11) install lockwire (13), bearing spacer (9); install end cover (14) with lubrication fitting (12),

lockwashers (8), hexhead cap screws (7) and secure in rotation until snug.

e. Install bail (23) with bushing (18) and set collars (19); set side frames (24) and install dowels (22), lockwashers

(21), and socket head capscrews (20).

REPLACEMENT

Bow ramp winch is replaced in accordance with procedures in the Equipment Conditions.

4-50