| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-11
LEGEND
1.
TREATMENT TANK AND COVER. A 14 GALLON TANK ON THE TOP LEFT HAND SIDE OF THE
UNIT.
2.
VENT PIPING. 1-1/2 INCH, PVC PIPING LOCATED ON THE SEDIMENTATION MODULE COVER
ON THE TOP RIGHTHAND SIDE OF THE UNIT.
3.
BLEACH STORAGE TANK. A 10 GALLON SEPARATE MOUNTED TANK LOCATED WITHIN 10 FT.
OF, AND AT LEAST ONE FT ABOVE THE UNIT.
4.
SEDIMENTATION MODULES. FOUR 8 INCH DIAMETER TANKS LOCATED ON THE RIGHT SIDE
OF THE UNIT (EACH MODULE CONSISTS OF TWO TANKS).
5.
BLEACH METERING VALVE. A VALVE LOCATED ON THE CABINET AND IN FRONT OF THE
TREATMENT TANK.
6.
FLOW PUMP AND MOTOR. A H.P. CENTRIFUGAL PUMP LOCATED IN THE REAR.
RIGHTHAND SIDE OF THE FRAME ENCLOSURE.
7.
SLUDGE RETURN PUMP AND MOTOR. A H.P. CENTRIFUGAL PUMP LOCATED IN THE
FRONT, RIGHTHAND SIDE OF THE FRAME ENCLOSURE.
8.
DISCHARGE PUMP AND MOTOR. A H.P. CENTRIFUGAL PUMP LOCATED IN THE FRONT,
LEFTHAND SIDE OF THE FRAME ENCLOSURE.
9.
WASTE DISPOSER. A H.P. GARBAGE DISPOSAL ASSEMBLY LOCATED IN THE REAR,
LEFTHAND SIDE OF THE FRAME ENCLOSURE.
10.
ELECTRICAL JUNCTION BOX. HOUSES THE ELECTRICAL CONTROLS FOR THE AUTOMATIC
OPERATION OF THE UNIT. IT IS LOCATED ON THE LEFT SIDE OF THE TREATMENT TANK.
11.
BACKWASH SPRAY NOZZLE. A SPRINKLER HEAD MOUNTED INSIDE THE TREATMENT TANK
AND BEHIND THE RETENTION/REDUCTION SCREEN.
12.
RETENTION/REDUCTION SCREEN. A SIZE 25/014 WIRE CLOTH SCREEN MOUNTED INSIDE
THE TREATMENT TANK.
Figure 1-1. Location and Description of Major Components.
1-3
|
||
|
||
