REPLACEMENT - continued - TM-55-1905-223-24-120064

Custom Search

FIGURE 3-5. Motor Adapter and Seal Alignment

TM-55-1905-223-24-12 Fire Pump System for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

Section VI. PREPARATION FOR STORAGE OR SHIPMENT

TM 55-1905-223-24-12

NOTE

Secure impeller nut evenly against the stuffing box.

Carefully set motor assembly into the casing (29) using care not to damage

packing. Replace clamping lugs (20), install lug machine bolts (19), and

torque up alternately to 31 ft-lbs.

NOTE

When assembling rotating assembly to the casing,

ensure motor feet are properly aligned with

foundation.

Replace motor foundation machine bolts (10), flat washers (11), and hexagon

nuts (12).

Connect electric cables into motor conduit box (1).

Replace cover gasket, cover, and cover machine bolts (2).

m. Return suction and discharge valves to locked "Open" position.

n. Check motor rotation, remove tags, and restore system to normal operation

(refer to TM 55-1905-223-10).

3-22