| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-15
d. Repair Drive Mechanism.
(1) Check the spline coupling for tooth damage, cracks, chips, or breakage.
(2) Replace the spline coupling as required.
ASSEMBLY
CAUTION
To prevent injury to personnel, use lifting to support wildcat.
a. Install Shaft and Wildcat.
(1) Install shaft in frame (FIGURE 4-4).
(2) Install shaft spacer (4).
(3) Install lubrication fitting and drum bushing (3).
(4) Install lifting sling to wildcat (2) and slide wildcat (2) on to shaft.
(5) Install spacers (10 and 11) and install bolt (12) in spacer (11) and secure.
(6) Install chain stripper (12, FIGURE 4-6).
b. Install Gear Box.
(1) Attach lifting sling to gear box (FIGURE 4-7)
(2) Lift gear box and slide onto shaft aligning mounting holes.
(3) Install bolts (21), lock washers (20) and nuts (19) and secure.
c. Install Clutch.
(1) Install machine key (9, FIGURE 4-4) on shaft (8).
(2) Install jaw clutch handle (1).
(3) Install spool and spacer (10).
(4) Install end spacer (11).
(5) Install capscrew (12) to retain pillow block and spacer (11).
(6) Install clutch lockout (13, FIGURE 4-5).
(7) Install lock washer (12) and shouldered bolt (11).
4-21
|
||
|
||
