| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(f)
Visual level indicator for reservoir fluid level.
(g)
End covers for internal reservoir access.
(h)
Inlet strainer.
(i)
Adjustable relief valve.
(j)
Thermostatically controlled heater.
(k)
Return line diffuser for fluid disbursement.
(l)
Reservoir for replenishing/receiving hydraulic fluid.
(m) Low fluid/temperature switch control.
(n)
System in-line filter.
(o)
Electrical dirty filter indicator.
(2) Hydraulic Motor Assembly/Failsafe Brake Assembly. The hydraulic motor assembly flow (speed control)
valve controls the (low, high) rate of speed of the vane-type motor which is coupled to the gearbox via an automatic
failsafe brake. The brake is spring loaded for application and hydraulic pressure is required for release. Connection to the
brake is from the pilot outlet of a hydraulic valve assembly with a pilot ratio of 10: 1. Pilot pressure is adjustable at the
valve by turning the valve cartridge screw out to increase the pressure setting and in to reduce pressure. Any malfunction
that reduces the hydraulic pressure below the release pressure of the brake will cause brake application.
1-9/(1-10 blank)
|
||
|
||
