| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
g. Suction Line Flange, Pipes, Suction Strainer.
(1)
Position suction line flange (9) over opening on reservoir with mounting screw holes aligned. Self-tapping
screws are installed at step (5) below.
(2)
Direct metallic pipe (34) through opening in suction line flange (9) and into pump fitting (19). Use pipe wrench
to secure metallic pipe to pump fitting.
(3)
Use pipe wrench to connect elbow (35) to metallic pipe (34) and adapter (36) to elbow (35).
(4)
Use wrench with 2-1/4 inch open end to connect suction strainer (37) to adapter (36).
(5)
Install self-tapping screws (8) and secure suction line flange (9) to top of reservoir.
h.Relief Valve. Install relief valve (39) on directional control valve (22).
i.
Pipes, Return Line Diffuser.
(1)
Use pipe wrench to connect pipe nipple (43) to welded coupler section (46) on interior of reservoir.
(2)
Use wrench with 2-inch open end to connect return line diffuser (42) to pipe nipple (43).
j.
Fluid Filter Head, Electric Indicator, Filter Element.
(1)
Use pipe wrench to connect pipe nipple (47) to welded coupler (46) section on top of reservoir.
(2)
Use pipe wrench to connect pipe elbow (49) to pipe nipple (47).
(3)
Use pipe wrench to connect adapter (50) to pipe elbow.
(4)
Install fluid filter head (13) to adapter (50).
(5)
Install electric indicator (14) on fluid filter head.
(6)
Connect electrical wiring to electric indicator and remove tags.
(7)
Install filter element (48) on fluid filter head (13).
k. Fittings.
(1)
Connect fittings (11) at directional control valve (22) and fluid filter head (13).
(2)
Position pipe assembly and couplers for installation.
2-43
|
||
|
||
