| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(15) Remove lifting device and sling.
f.
Brake Reducer Coupling. (FIGURE 4-16)
(1)
Install machine key (6) on high speed shaft (5).
(2)
Install brake reducer coupling (3) on high speed shaft.
(3)
Secure brake reducer coupling to high speed shaft with setscrew (4).
g. Brake Reducer Mount. (FIGURE 4-16)
(1)
Position brake reducer mount (2) on gear box with mounting holes aligned.
(2)
Install four socket head capscrews (1) to secure brake reducer mount (2) to gear box.
(3)
Replace failsafe brake assembly, paragraph 2-16.
(4)
Replace hydraulic pump assembly, paragraph 2-15.
h. Mechanical Clutch/Shoulder Bolt. (FIGURE 4-15)
NOTE
Install clutch lockout arm on right side of clutch jaw arm.
(1)
Position clutch lockout arm (10) over clutch jaw arm (1) with mounting boltholes aligned.
(2)
Install hexagon head machine bolt (13), flat washer (12), and head selflocking nut (11) to secure clutch
lockout arm to clutch jaw arm (1).
(3)
Install hexagon head machine bolt (13), flat washer (12), and head selflocking nut (11) on clutch jaw arm (1).
(4)
Engage clutch jaw arms (1) on sliding jaw clutch (5).
(5)
Position clutch jaw arms (1) between bracket (9).
(6)
Install shoulder bolt (8) through right side of bracket (9), clutch jaw arm (1), and out left side of bracket (9).
(7)
Install lockwasher (7) and plain hexagon nut (6) on threaded end of shoulder bolt to secure clutch jaw arms
(1) on bracket (9).
(8)
Position clutch handles (3) between clutch jaw arms (1).
4-49
|
||
|
||
