| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
(9)
Install hexagon head machine bolts (2, 4) to secure clutch handles (3) to clutch jaw arm (1).
i.
Brake Band Lining. (FIGURE 4-22)
For assembly procedures, refer to ASSEMBLY task, step e.
j.
Brake Bands. (FIGURE 4-14)
Position brake band halves (3) on brake drum assembly (4).
k.
Split Brake Band Pin. (FIGURE 4-14)
(1)
Make sure brake band halves (3) are positioned correctly over brake drum assembly (4).
(2)
Install headless straight pin (18) into brake band bracket (19).
(3)
Raise anchor brake arms (20) to the upright position for brake band installation.
(4)
Install brake pin (21) into anchor brake arms (20) and brake band bracket (23).
(5)
Install cotter pin (22) on brake pin (21).
(6)
Install threaded end rod (2) through brake pin (21), and turn brake hand-wheel (1) clockwise until rod
engages with threads of headless straight pin (18).
(7)
Support weight of bottom brake band (3) as both brake bands are aligned with brake pin mounting holes in
brake band bracket (7).
(8)
Install brake pin (6) into brake band bracket (7) to secure brake bands (3).
(9)
Install cotter pin (5) into brake pin (6).
(10) Turn mechanical brake handwheel (1) clockwise to take up slack in braking assembly.
l.
Springs. (FIGURE 4-14)
(1)
Position spring assembly above spring eyelets (8) to install springs (9).
(2)
Apply upward pressure to spring support bracket (14).
(3)
Position spring support bracket over mounting boltholes on levelwind side frame (11).
(4)
Install two hexagon head machine bolts (15) and lockwashers (16) to secure spring support bracket (14) to
levelwind side frame (11).
4-50
|
||
|
||
