| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-16
NOTE
Spring assembly is properly adjusted if springs are taut and assembly shows no apparent signs of
slackness in spring tension. Make necessary adjustments as required.
(5)
Turn adjustment nuts (10) several turns in clockwise direction, then turn adjustment nuts (13) clockwise to
increase tension on spring assembly (9). Repeat steps to further increase spring tension.
(6)
Turn adjustment nuts (13) several turns in counterclockwise direction, then turn adjustment nuts (10)
counterclockwise to decrease tension on spring assembly (9). Repeat steps to further decrease spring
tension.
m. Gypsy Cathead. (FIGURE 4-13)
NOTE
Two soldiers are required for removal procedure.
(1)
Install machine keyways (10) at each end of winch shaft (5).
(2)
Position gypsy cathead (6) in alignment with winch shaft and machine keyway (10).
(3)
Engage gypsy cathead over winch shaft and keyway.
(4)
Position cathead retaining plate (7) over mounting boltholes on winch shaft.
(5)
Install two hexagon head capscrews (9) with lockwashers (8) to secure cathead retaining plate and gypsy
cathead to winch shaft (5).
(6)
Position gypsy cathead (4) in alignment with winch shaft and machine keyway (10).
(7)
Engage gypsy cathead over winch shaft and keyway.
(8)
Position cathead retaining plate (3) over mounting boltholes on winch shaft.
(9)
Install two hexagon head capscrews (1) with lockwashers (2) to secure cathead retaining plate and gypsy
cathead to winch shaft.
n. Levelwind Bushings. (FIGURE 4-25)
For assembly procedures, refer to ASSEMBLY task, step b.
4-51
|
||
|
||
