| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
NOTE
Cover must be placed on outer tub so notch
on top edge of outer tub cover is directly
over left front clip hole in tub.
Install outer tub cover (5) and secure with spring clip (7).
ad.
ae.
Install lockwasher (2), trigger (4), and hexagon head capscrew (3).
af.
I n s t a l l plug (1).
Install washer machine (1, FIGURE 2-68) cabinet top (2) as follows:
ag.
NOTE
Ground wire must be attached to rear top
flange of cabinet base before cabinet top
can be secured to cabinet base.
(1) Attach cabinet top to cabinet base (1).
(2) Press pressure hose and base wire harness block through hole in cabinet
top.
(3) Install speed nut (9) and assembled washer screw (8).
(4) Connect pressure hose (5) to pressure switch (6).
(5) Connect base wire harness to control hood wire harness at quick disconnect
block.
(6) Install control panel (4) and machine screw (3).
NOTE
Refer to paragraphs 2-84, 2-87 and 2-88
before securing front panel.
ah.
Install front panel (2, FIGURE 2-67) on washer machine (1) as follows:
(1) Engage front panel hold-down clips (4) in cabinet top slots.
NOTE
Before securing front panel to cabinet base
ensure that lugs are aligned with holes in
front panel.
(2) Secure front panel using machine screw (3).
Refer to paragraph 2-83.
ai.
2-377
|
||
|
||
