| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
Lift front of cabinet top (11), disengage from hinges (22, Sheet 3) and
f.
remove cabinet top and attached control hood.
Remove front bulkhead and cylinder assembly, refer to paragraph 2-90.
g.
Remove motor and exhaust fan group, refer to paragraph 2-93.
h.
Remove rear bulkhead and heater box (including heat shield), refer to
i.
Remove pad (17).
j.
Remove machine screw (19) and sleeve bushing (18).
k.
Remove hexagon head capscrew (21), locknut (20), and hinge (22).
l.
Remove hexagon head capscrew (24) and access plate (23).
m.
Remove hexagon head capscrew (25) and dryer exhaust duct (26).
n.
Remove hexagon head capscrews (28, 33).
o.
Remove cabinet (27) from base (32).
p.
Remove rubber pad (31), leveling leg (30), and hexagon plain nut (29).
q.
Install hexagon plain nut (29), leveling leg (30), and rubber pad (31) on
a.
base (32).
Install cabinet (27) on base.
b.
Install hexagon head capscrews (28, 33).
c.
d.
Install exhaust duct (26) and hexagon head capscrew (25).
Install access plate (23) and hexagon head capscrew (24).
e.
Install hinge (22), locknut (20), and hexagon head capscrew (21).
f.
Install sleeve bushing (18) and machine screw (19).
g.
Install pad (17).
h.
Refer to paragraphs 2-89.
i.
Install heater box (including heat shield) and rear bulkhead, refer to
j.
k.
Install motor and exhaust fan group, refer to paragraph 2-93.
l.
Install front bulkhead and cylinder assembly, refer to paragraph 2-90.
2-407
|
||
|
||
