| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
Replace/Repair Engine Room Control Station.
a. Removal, b. Disassembly, c. Repair, d. Assembly,
This task covers:
e. Test, f. Replacement, g. Adjustment.
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's,
Air pressure to engine room control
station secured at the air prep
system and tagged "Out of Service -
Materials/Parts
Do Not Operate." (TM 55-1905-223-10)
For TEST and ADJUSTMENT procedure,
refer to para. 2-117.
Spring tension washer P/N F023-147
Venturi meter removal procedure is the
Thrust washer bering P/N H257-09
same as para. 2-116.
Roller needle bearing P/N H004-92
Sleeve bearing P/N H004-115
Poppet valve P/N B912-016
Preformed packing P/N H136-54
Venturi meter P/N H032-62
Four-way directional valve
P/N F041-0003
Pneumatic grease, Item 7, Appendix C
Lubriplate No. 107, Item 6, Appendix C
Teflon tape, Item 5, Appendix C
Warning tags, Item 1, Appendix C
REMOVAL
Remove Engine Room Control Station.
a.
(1) Remove 12 machine bolts (2, FIGURE 2-99).
(2) Remove access panel (3) from engine room control console (1) stbd side.
(3) Remove four machine bolts (2, FIGURE 2-100).
(4) Inside console remove lo&washers (3) and nuts (4).
(5) Lift control station (1) up and out of console until flexible hoses are
accessible.
(6) Tag and disconnect flexible hoses at ports (11, 12, and 13).
(7) Cap or plug connections.
(8) Remove control station (1).
2-464
|
||
|
||
