| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 55-1905-223-24-18-1
1 . Install light lens (46) on indicator light at front of door.
(2) Push switches.
(a) Push switch (43).
1 Position push switch and electrical contact (44) at rear of door.
2 Install locknut (38) on push switch.
3 Connect electrical leads to push switch at rear of door.
Remove tags.
(b) Push switch (41).
Refer to steps (a) 1 through 3 to install push switch (41) and
electrical contact (42).
(c) Push switch (39).
Refer to steps (a) 1 through 3 to install push switch (39) and
electrical contact (37).
(d) Push switch (36).
Refer to steps (a) 1 through 3 to install push switch (36) and
electrical contact (37).
c.
Position motor controller (34) on a clean flat surface.
Circuit breaker.
d.
(1) Position circuit breaker (1) over connector assembly (3) in motor
controller.
(2) Engage circuit breaker on connector assembly.
(3)
Secure circuit breaker to motor controller panel with mounting screws.
(4) Install switch cover over circuit breaker and secure cover with self
locking screw (2).
(5) Connect electrical leads to circuit breaker (1). Remove tags.
e.
Terminal block (receptacle).
(1) Position terminal block (15) over mounting screw holes on motor controller
panel.
(2) Install machine screws (18), lockwashers (17) and plain hex nuts (16) and
secure terminal block to motor controller panel.
(3) Connect electrical leads to terminal block (15). Remove tags.
Fuseholder block.
f.
2-804
|
|||||
|
|||||
