| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
Repair Lavatory Faucet. (FIGURE 2-254)
a. Removal, b. Repair, c. Replacement.
This task covers:
INITIAL SETUP
Equipment Condition
Tools
At Auxiliary Machinery Motor Control
Tool kit, general mechanic's,
Center press No. 1 fresh water
maker pump STOP pushbutton and set
P205-4 circuit breaker to the OFF
Materials/Parts
p o s i t i o n . Press No. 2 fresh water
maker pump STOP pushbutton and
Piping system, potable water
set P205-5 circuit breaker to the
P/N 8532028, refer to
OFF position. Tag switches "Out
TM 55-1905-223-24P
of Service - Do Not Operate."
Teflon tape, Item 5, Appendix C
a. Close hot water supply valve (2).
Close cold water supply valve (1).
b.
NOTE
Open faucets to relieve water pressure before removing
faucet.
c.
Remove screws (4) from top of lavatory faucet (3).
d.
Remove handles (5) from faucet (3).
Remove covers (6) from top of lavatory faucet (3).
e.
Remove nuts (7) from top of lavatory faucet (3).
f.
Remove rubber washers (8) from top of lavatory faucet (3).
g.
h.
Disconnect joint adapters (12) from manifold (11).
Remove faucet (16) from top of lavatory.
i.
Disconnect flared coupling (13) from faucet (16).
j.
k.
Remove manifold (11) with nuts (10) and washers (9) attached from bottom of
lavatory.
2-967
|
||
|
||
