| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-18-1
2-324.
Repair Galley Faucet. (FIGURE 2-255)
a. Removal, b. Repair, c. Replacement.
This task covers:
Equipment Condition
Tools
Tool kit, general mechanic's,
At Auxiliary Machinery Motor Control
Center press No. 1 fresh water maker
pump STOP pushbutton and set P205-4
circuit breaker to the OFF position.
Materials/Parts
Press No. 2 fresh water maker pump
STOP pushbutton and set P205-5
Piping system, potable water
circuit breaker to the OFF position.
P/N 8532028, refer to
Tag switches "Out of Service - Do Not
TM 55-1905-223-24P
Teflon tape, Item 5, Appendix C
Operate."
a. Close cold water supply valve (3).
Close hot water supply valve (4).
b.
NOTE
Open faucets to relieve water pressure before removing
faucet.
c. Disconnect flared coupling (2) from bottom of faucet (1) and flared coupling
(5) from bottom of faucet (1).
Remove jam nuts (7) and washers (6) from faucet (1).
d.
Remove faucet (1) from galley sink.
e.
Repair at this level of maintenance is by replacement of galley faucet (1).
NOTE
Apply teflon tape to all threaded connections prior to
assembly.
2-970
|
||
|
||
