DISASSEMBLY-CONT - TM-55-1905-223-24-18-20221

Custom Search

DISASSEMBLY-CONT.

TM-55-1905-223-24-18-2 Landing Craft Utility (LCU) NSN 1905-01-154-1191 Basic Craft Part II Manual

REPAIR

TM 55-1905-223-24-18-2

(3)

Lift power supply socket to expose electrical wires.

Tag and, using a solering iron, unsolder

electrical wires from power supply socket (21).

(4) Remove power supply socket.

(5) Remove four plain hex nuts (15), lockwashers (11), and machine screws (12) from bracket (56).

(6) Remove bracket.

(7) Remove identification marker (24) from bracket.

o. Power transformer (25).

(1)

Remove four plain hex nuts (15), lockwashers (11), and machine screws (12) from power

(2) Lift power transformer to expose electrical wires.

(3) Tag and, using a soldering iron, unsoler electrical wires from power transformer.

(4) Remove power transformer (25).

p. Electrical receptacle (38).

NOTE

Electrical receptacle connector (3 pin plug) disconnected during

removal procedure.

(1) Remove four flathead screws (42) and lockwashers (43) from electrical receptacle (38).

(2) Light electrical receptacle (38) to expose electrical wires.

(3) ag and, using a soldering iron, unsolder electrical wires from electrical receptacle.

(4) Remove electrical receptacle (38), gasket (40) and insulating tubing (41).

q. Electrical receptacle (44).

NOTE

Receptacle plug (2 pin plug) disconnected during removal

procedure.

(1) Remove four flat head screws (42) and lockwashers (43) from electrical receptacle (44).

(2) Lift electrical receptacle (44) to expose electrical wires.

3-199