| Tweet |
Custom Search
|
|
|
|||||
|
|||||
 TM 55-1905-223-24-18-2
(5) Install four lockwashers (43) and flat head screws (42) and secure electrical receptacle to bottom of
silk screened box.
NOTE
Receptacle plug (2 socket plug) connected during replacement
procedure.
d. Electrical receptacle (44).
(1) Position gasket (40) and electrical receptacle (44) over mounting hole with electrical wires exposed.
(2) Install insulating tubing (41) on electrical wires.
(3) Connect by soldering electrical wires to electrical receptacle (44). Remove tags.
(4) Lower electrical receptacle and gasket over mounting screw holes on silk screened box (26).
(5) Install four lockwashers (43) and flathead screws (42) and secure electrical receptacle to bottom of
silk screened box.
(6) Install jumper wire (46) and protective cap (47) on electrical receptacle (44).
NOTE
Receptacle plug (2 pin plug) connected during replacement
procedure.
e. Electrical receptacle (38).
Repeat steps c.(l) through (5) to install electrical receptacle (38).
NOTE
Electrical receptacle connector (3 pin plug) connected during
replacement procedure.
f. Power transformer (25).
(1) Position power transformer over exposed electrical wires.
(2) Connect by soldering electrical wires to power transformer (25). Remove tags.
(3) Position power transformer over mounting screw holes.
(4) Install four machine screws (12), lockwashers (11), and plain hex nuts and secure power transformer
to support mount.
3-201
|
|||||
|
|||||
