| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-2
d. Remove and replace protective caps, plugs, inserts, wrappings, and tape when inspection/inventory is completed.
Inspect piping openings for damage. Wipe off dirt, grease, or protective films at time of installation.
e. Remove chocks from resilient mounted components.
Section III. INTERMEDIATE DIRECT SUPPORT PREVENTIVE MAINTENANCE
CHECKS AND SERVICES (PMCS)
3-5. PMCS. Intermediate direct support preventive maintenance checks and services are a function of unit
maintenance, Chapter 2, Section III.
Section IV. INTERMEDIATE DIRECT SUPPORT TROUBLESHOOTING
3-6. Troubleshooting. Both a symptom index and a troubleshooting table are provided
The symptom index will help
you locate the information you need for troubleshooting.
SYMPTOM INDEX
Troubleshooting
Procedure
CLUTCH
Not engaging (slipping)
Item 4
Pressure too low or keeps changing
Item 2
Temperature too high
Item 1
Using/losing oil
Item 3
Table 3-1 lists the common fault conditions that may be found during operation or maintenance of the equipment. Look
for causes and do corrective actions in the order listed. This manual cannot li3t every symptom that may show up, and it
cannot list all the possible causes and corrective actions. If a symptom is not listed, or if it keeps up after you have
performed the corrective actions, notify your supervisor.
3-2
|
||
|
||
