| Tweet |
Custom Search
|
|
|
||
 TB 9-2330-246-20
(11) Remove spring tension clip (46) with snap ring pliers and remove bearing (45) with bearing puller.
(12) Remove ring (47).
(13) Remove spring tension clip (48) with snap ring pliers and remove bearing (1 from pinion shaft (5)with bearing
)
puller.
f.
Remove rear shaft bearing.
(1) Remove assembled washer/screws (14).
(2) Remove nuts (15).
(3) Remove capscrews (17) and straight pin (18).
(4) Remove round nut (16) and access cover (19).
(5) Remove assembled washer/screw (21).
(6) Remove bearing nut (20).
(7) Remove shaft sealing ring (22) and discard.
(8) Remove ring spacer (23).
(9) Remove rear shaft bearing (24) with bearing puller.
REPAIR
a. Clean components. Clean all input shaft components with solvent and wipe dry with shop cloths.
b. Inspect components. Inspect the following components for physical damage or excess corrosion:
(1) Check valve (30).
c.
Repair components. Repair will consist of installing new bearings and check valve.
412
|
||
|
||
