| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-2
ASSEMBLY
a. Assemble the clutch assembly.
(1) Install locking plate (2) to bearing (1) with machine screws (3).
(2) Install bearing (1) on the pinion shaft (5) with spring tension clip (48).
(3) Install tightening sleeves (4) in locking plate (2).
(4) Install clutch carrier (42) to clutch casing (41) with screws (49).
(5) Install bearing (45) on to clutch carrier (42) with hydraulic press, and install spring tension clip (46) with snap
ring pliers.
(6) Install ring (47) and clutch carrier (42) with bearing (45) and clutch casing (41) on the pinion shaft (5).
(7) Install screws (43) through locking plate (44) to lockingplate (2) and tightening sleeves (4).
(8) Install carrier (40) to pinion (5) with screws (26).
(9) Install discs (38 and 39) alternately into the clutch casing (41) over the carrier (40).
NOTE
There are a total of 12 outside discs and 11 inside discs.
(10) Install annular piston (37) in the clutch casing with retaining rings (36).
(11) Install bearings (8 and 12) on pinion shaft (5) with hydraulic press.
(12) Install nut (11) on shaft (5) and secure with washer/screw (9).
(13) Install bearing casing (7) and secure with capscrews (13).
(14) Install ring spacer (10) and secure with threaded pin (6) through bearing casing (7).
b. Install the clutch assembly onto shaft (25).
c.
Replace clutch cover.
(1) Remove any burrs on the tapered portion of the shaft (25) with crocus cloth.
413
|
||
|
||
