| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
Table 2-1. Preventive Maintenance Checks and Services
D-Daily
M-Monthly
Q-Quarterly
A-Annually
B-Biennially
E-Every 1600 Operating Hours
Item
Interval
Items To Be
No.
DM
Q
A
B
E
Inspected/Serviced
Procedures
29
CONT
c.
Use a wire feeler gauge and measure the radial (side-to-side) clear-
ance. Hold the shaft toward the feeler gauge to check. The clearance
should be no greater than 0.033 inch (0.84 mm).
d.
Replace the turbocharger if either measurement exceeds specifica-
tions above (paragraph 2-30).
30
Vibration Damper
Visually check the damper for dents, wobble, and other damage or
deformation. Replace if required. Refer to paragraph 3-26.
31
Fuel Pump
Clean or replace the fluid filter element. Refer to paragraph 3-16.
32
Valves and Injectors
Adjust valves and injectors every 1500 hrs. or annually which ever occurs
first. Refer to page 2-115, para. (5)-g.
2-19
|
||
|
||
