| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
FIGURE 2-56. Crosshead Clearance.
NOTE
The crankshaft must be rotated clockwise to the accessory drive pulley (2, Figure 2-52)
to install all the push rods.
(3)
Install the injector push rods in the corresponding numbered location.
(4)
Install the valve push rods in the corresponding num ered location.
b
m
Install the rocker lever housings (paragraph 2-39).
n.
Adjust the valves and the injectors (paragraph 2-39).
o.
Install the aftercooler (paragraph 2-41).
p.
Install the exhaust manifold (paragraph 2-42).
q.
Install the injectors (paragraph 2-40).
r.
Install the turbocharger (paragraph 2-30).
s.
Install the rocker housing covers (paragraph 2-39).
t.
Install the air crossover connection pipe (paragraph 2-41).
u.
Fill the cooling system (Table 2-1, Item 24).
v.
Prepare engine for operation, remove all tags, and turn on electrical power. TM 55-1905-223-10.
w.
Start engine and run until it reaches a temperature of 1800F (820C) and check for leaks. TM 55-1905-223-10.
2-151
|
||
|
||
