| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-3
e. Remove the piston and the ring assembly from the container of engine oil. Allow the excess oil to drain
from the piston.
NOTE
The ring gap of each ring must not be aligned with the piston pin or with any
other ring.
f.
Position the ring gaps as shown in Figure 3-58 .
(1)
(Top) Ring - A
(2)
Second Ring - B
(3)
Third Ring - C
(4)
(Bottom) Oil Ring - D
(5)
Piston Pin - E
g.
Install the connecting rod guide pins (Figure 3-59).
h.
Use piston ring compressor to compress the rings (Figure 3-59).
FIGURE 3-58. Ring Gap Positions.
3-107
|
||
|
||
