| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
Table 2-1. Preventive Maintenance Checks and Services (PMCS)
D-Daily
M-Monthly
Q-Quarterly
A-Annually
B-Biennially
Item
Interval
Items To Be
No.
DMQAB
Inspected/Serviced
Procedures
15
Crankcase/Breather/Tube
Remove the breather and tube assembly. Refer to paragraph 2-34.
NOTE
Foam-type elements must be replaced.
Clean the wire mesh element and the inside of the tube with a clean rag and cleaning
solvent (Item 2 and 5, Appendix C). Visually inspect all parts of the assembly for cracks
or other damage and make replacement as necessary.
Assemble and install the assembly on the engine (paragraph 2-34).
WARNING
Wait until the water temperature is below 120
F
(50 ) before removing the coolant system
C
pressure cap or removing filters.
16
Coolant Filter (Corrosion
Close the shutoff valve(s).
Resistor)
Remove the filter by turning counter clockwise.
Discard the filter.
Clean the filter head with a clean rag (Item 2, Appendix C).
2-15
|
||
|
||
