| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
FIGURE 2-24. Lubricating Oil Bypass Filter Group .
REPAIR
Repair to the oil bypass group is by replacing the fluid filter element (14) and nonmetallic hose assemblies (11).
REPLACEMENT
a.
Install fluid filter head (13) on angle bracket (1) and secure with capscrews (5), flat washers (4),
lockwashers (3), and nuts (2).
b.
Clean oil filter head surface with cleaning solvent.
c.
Use clean vegetable oil to lubricate the gasket surface and fill filter with clean lubricating oil.
d.
Install fluid filter element (14) into fluid filter head (13) by turning clockwise. Use oil filter wrench to
tighten the filter an additional 3/4 to one turn.
e.
Screw nonmetallic hose assemblies (11) into pipe elbows (10).
f.
Screw pipe elbows (12) onto ends of nonmetallic hose assemblies (11).
g.
Place hose clamps (9) on nonmetallic hose assemblies (11) and secure with capscrews (6), flat
washers (8), and lock washers (7).
2-98
|
||
|
||
