Repair Oil Pan Group. (FIGURE 2-59)

Custom Search

FIGURE 2-58. Bearing End Clearance

TM-55-1905-223-24-5 Bowthruster Engine for Landing Craft Utility (LCU) NSN 1905-01-154-1191 Manual

FIGURE 2-59. Oil Pan Group

TM 55-1905-223-24-5

2-44. Repair Oil Pan Group. (FIGURE 2-59)

This task covers:

a. Removal

b. Inspection/Repair . c.

Replacement

INITIAL SETUP:

Tools

Equipment Condition

Tool kit, general mechanic's

Engine shut down (TM 55-1905-223-10).

rail and marine diesel engine,

Engine tagged, "Out of Service - Do Not

Operate."

Combination wrench set,

Lubricating oil drained (PMCS Table 2-1,

metric 10mm to 24mm,

Item 12).

5120-01-046-4979

Materials/Parts

Sediment strainer element P/N 20622

Gasket, P/N 3032861 P/N 65274, P/N 157551

Nonmetallic hose assembly P/N 3017963

Cleaning solvent, Item 5, Appendix C

REMOVAL

Remove dipstick (gauge) (21) from the oil gauge tube (20). Turn the T-handle (22) on the dipstick

counterclockwise to loosen it for removal.

Remove support clip (15) from nonmetallic hose assembly (14).

Remove capscrews (16) and lockwashers (17) from the handhole cover bracket (18) and remove the

gauge tube, cover, and gasket (19) from the cylinder block.

Disconnect nonmetallic hose assembly (14) from the oil pan and lubricating oil pump flange to tube

elbow (11). Remove nonmetallic hose assembly.

Remove flange to tube elbow connection (11) and suction gasket (12) from the oil pan. Discard the

gasket (12).

Remove captive washer capscrews (23, 24) that hold the oil pan to the cylinder block and gear cover.

Remove capscrews (2) and washers (3) that hold the oil pan to the rear cover.

Remove oil pan and discard the gasket (1).

2-161