| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
FIGURE 3-79. Guide Studs and T-Handles.
(4) Determine the capscrew thread size, and install two T-handles (4) in the flywheel at points (3) and
(5).
WARNING
Because the flywheel weighs more than 50 lb (23 kg), two people or a hoist will
be required to lift the flywheel to avoid personal injury.
(5) Remove the remaining four flywheel mounting capscrews (7).
(6) Tighten capscrews (5) in alternating sequence to loosen the flywheel (FIGURE 3-80) .
(7) Remove the flywheel (FIGURE 3-81) .
(8) Use a mandrel and a hammer to remove the pilot bearing from the flywheel.
b. Remove the flywheel housing.
(1) Before removing the housing, loosen the lock nut and unscrew the magnetic coil (13, FIGURE 3-80)
pickup and wiring from the top of the housing (5).
(2) Loosen the oil pan mounting capscrews four to five turns (FIGURE 3-82) .
3-121
|
||
|
||
