| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
(3) Remove the four oil pan mounting capscrews which secure the oil pan to the rear cover (FIGURE 3-
82) .
CAUTION
Use extreme care when releasing the oil pan gasket from the rear cover to
prevent damage to the gasket. If the gasket is damaged, the oil pan must be
removed and the gasket replaced (paragraph 2-44).
FIGURE 3-81. Removing Flywheel.
(4) Insert a feeler gauge or shim stock between the rear cover and the oil pan gasket. Move the feeler
gauge or the shim stock back and forth to release the gasket from the rear cover.
(5) Remove the capscrews from the rear cover, and remove the cover from the crankshaft flange
(6) Remove the crankshaft seal from the rear cover.
(7) Use the lifting fixture to support the rear of the engine.
(8) Remove the capscrews and both rear engine mounts (FIGURE 3-84) .
(9) Remove capscrews (1) and (2), install two 5/8-18 x 4 inch guide studs (FIGURE 3-85) .
(10) Remove the remaining capscrews.
3-123
|
||
|
||
