| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
4-5. Initial Setup Procedure. Includes operational checks and inspections that are not performed for a
routine startup. Direct support maintenance personnel will perform initial setup in accordance with the
operator's manual, TM 55-1905-223-10.
4-6. Normal Startup. Refer to the operator's manual, TM 55-1905-223-10.
4-7. Shutdown Procedure (Usual or Unusual). Refer to the operator's manual, TM 55-1905-223-10.
SECTION III. INTERMEDIATE GENERAL SUPPORT PREVENTIVE
MAINTENANCE CHECKS AND SERVICES
4-8. PMCS. There is no PMCS at the general support level. See Chapter 2, Section III.
Section IV. INTERMEDIATE GENERAL SUPPORT TROUBLESHOOTING PROCEDURES
4-9. General Diagnostic Information. For general information concerning engine noise and white smoke,
refer to Chapter 2, paragraphs 2-17 and 2-18, and Chapter 3, paragraphs 3-9 and 3-10.
4-10. Troubleshooting. Both a symptom index and a troubleshooting table are provided. The symptom
index will help you locate the information you need for troubleshooting.
SYMPTOM INDEX
Troubleshooting
Procedure
EXCESSIVE CRANKCASE GASES (BLOWBY)
Item 5
EXCESSIVE ENGINE NOISE
Item 6
EXCESSIVE LUBRICATING OIL CONSUMPTION
Item 9
FUEL IN THE LUBRICATING OIL
Item 2
LOSS OF ENGINE COOLANT (INTERNAL)
Item 8
LUBRICATING OIL IN THE COOLANT
Item 7
LUBRICATING OR HYDRAULIC OIL IN COOLANT
Item 1
ROUGH IDLE
Item 4
WARM ENGINE RUNS ROUGH OR MISFIRES
Item 3
4-2
|
||
|
||
