| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-5
FIGURE 4-17. Cam Follower Lockscrews.
(1) Use a punch with a sharp point to make a hole in the center of the plugs (2). Hit one edge of the
plug to loosen it.
(2) Use pliers to remove the plug (2).
c.
Push against the shafts (5, FIGURE 4-19) in the housing to move the plug out of the hole in the
opposite end of the housing.
d.
Slide shafts out of housing. This frees the levers which can then be lifted from the housing.
NOTE
To prevent increased wear, mark the cam follower shafts
and the levers as they are removed so they can be installed
back in their original positions in the housing (FIGURE 4-18).
e.
Remove the cam follower levers (6, FIGURE 4-19) from the housing.
FIGURE 4-18. Marking Original Location.
4-34
|
||
|
||
