| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-6
i.
Remove four bolts, nuts, and washers (8) securing oil tank assembly (10) to frame.
j.
Remove oil tank assembly (10).
_______
REPAIR (FIGURE 2-1)
a. Remove screw-in connector (2) and preformed packing (3) from filter opening cap (4). Discard preformed
packing (3).
b. Install new preformed packing (3) with screw-in connector (2) into filter opening cap (4).
c.
Clean fill cap and filter (5), refer to PMCS, Item 4. Check for cracks, dents or broken seals. Replace if
required.
d. Install fill cap and filter (5) into tank cover (6).
______________
REPLACEMENT (FIGURE 2-1)
a. Position tank (10) on frame and secure with four bolts, nuts, and washers (8). Torque to 15 ft-lbs.
b. Remove plugs from inlet and outlet lines.
c.
Connect outlet fitting (7) to tank assembly (10).
d. Connect oil inlet fitting (1) to tank assembly (10).
e. Remove fill cap and filter (5).
f.
Fill with lube oil to appropriate level in sight glass, refer to PMCS, Item 1.
g. Install fill cap and filter (5).
h. Restore power to the assembly and remove warning tags.
Change 3
2-19/(2-20 blank)
|
||
|
||
