| Tweet |
Custom Search
|
|
|
||
 TM 55-1905-223-24-9
TEST
a.
Pull out top (4) and bottom (7) knobs on sight gauge (5).
b.
Hold knobs outward while sight glass (5) fills. Read tank fluid level.
c.
Release knobs. They have a spring return.
d.
Fluid level above "LOW" (6) mark is OK.
e.
If fluid is below "LOW" mark, reservoir needs to be topped off.
f.
Repeat fluid level check for other reservoir.
SERVICE
WARNING
Keep hands, tools, and clothes away from rotating machinery, or personal injury could
result.
CAUTION
Do not overfill the reservoir. "FULL" mark on sight gauge includes air space over fluid for
air/fluid expansion and vessel pitch and roll.
NOTE
Do not attempt to read sight gauge or add fluid in rough seas.
a. Drain.
(1)
Open six in-line shutoff valves.
(2)
Position utility pail and funnel under reservoir drain plug on front of pumpset.
(3)
Remove drain plug and drain reservoir. Replace plug.
(4)
Remove inlet filter cartridge (paragraph 2-21).
(5)
Repeat for other reservoir.
2-7
|
||
|
||
